UPPER AND LOWER SINGLE BRUSH CYCLONE JET DUST CLEANER

Suitable for cleaning dust from surfaces featuring contours, recesses, or irregular shapes.

Online consultation

UPPER AND LOWER SINGLE BRUSH CYCLONE JET DUST CLEANER

EQUIPMENT TYPE

Equipment Selection

Serial Number	Equipment Model	Equipment dimensions (LWH)	Suitable conveyor belt width		Equipment power		Equipment air consumption		Required vacuum airflow for the equipment
Serial Number	Equipment Model	Equipment dimensions (LWH)	Min (mm)	Max (mm)	Hertz	Keyword	Atmospheric pressure (MPa)	Capacity (cubic meters per minute)	Wind speed (m/s)	Air volume (cubic meters per minute)
1	JMTBSR -3D-1000	1640475430	950	1050	50/60	1	≥0.6	0.447	≥28	68.841
2	JMTBSA -3D-1400	2040475430	1350	1500	50/60	1	≥0.6	0.447	≥28	68.841

Customization available for non-standard sizes.

DIMENSION DRAWING

SCOPE OF APPLICATION

CLEANING SCHEMATIC OF SWORD-TYPE BRUSH ASSEMBLY

The seamless integration of high-speed rotary-air-jet technology and blade-brush cleaning ensures reliable removal of substantial dust generated during CNC machining, as well as residual dust trapped in wood grain pores after sanding solid wood. This combined cleaning system is primarily used for large-area dust removal and for eliminating fine particulate matter remaining on workpiece surfaces following sanding, thereby meeting the cleanliness requirements prior to painting, film lamination, printing, and label application.

1. Linear brush with a slightly damp nozzle
The sprayer is aligned with the brush filaments in the direction of the linear brush’s movement.
Apply a thin film of cleaning and antistatic solution to the tip.

2. Product Surface Cleaning Methods
The linear brush wipes in the direction of travel, capturing particles with its slightly damp bristles and safely conveying them from the product surface to the extraction system.

3. Self-cleaning brush belt
The high-speed reverse-rotating scraper flings the dust adhering to the brush, which is then blown away by compressed air and conveyed into the dust collection inlet.

4. Rotary Cyclone Jet Device
A high-speed rotating nozzle, coupled with solenoid valve control technology, generates a swirling high-pressure air jet that blows dust out of workpiece holes and recesses, while a cyclonic dust-collection duct captures the suspended dust.

LUFTTECHNIK UND WISCHTECHNIK EFFEKTIV KOMBINIEREN

Non-contact rotary cyclonic air-jet technology is perfectly combined with blade-brush cleaning. The lifted dust is captured and conveyed through the cyclone channel, while the blade brush removes even finer particulates, directing them precisely to the suction inlet for efficient workpiece cleaning. The specialized cyclonic nozzle further reduces compressed-air consumption.